B&C 8 MBX 51 16 LF Driver B&C 8mbx51-16
167,89 Add to cart

B&C 8 MBX 51 16 LF Driver B&C 8mbx51-16

167,89

Brand: B&C SPEAKERS
Article number: 8mbx51-16

  • 400 W continuous program power capacity
  • 51 mm (2 in) aluminium voice coil
  • 60 – 4000 Hz response
  • 97 dB sensitivity
  • Neodymium ring magnet assembly
  • Aluminium ring allows a very low distortion figure
  • Ventilated voice coil gap for reduced power compression

Brand: B&C SPEAKERS
Article number: 8mbx51-16

B&C 8 MBX 51 16 LF Driver

  • 400 W Continuous power handling
  • 2.0 in (51 mm) Voice coil diameter
  • Neodymium Ring Magnet material

The MBX series mid-bass woofers from B&C Speakers offer acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures.

Type of speaker 8″
Nominal Diameter mm 200 mm
Impedance Ohm 16 Ω
Power Handling 400 W
Frequency range 65 – 4000 Hz
Sensitivity dB 97.0
Magnet Material Neodymium Ring
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 200 mm (8.0 in)
Nominal Impedance 16 Ω
Minimum Impedance 11.2 Ω
Nominal Power Handling 200 W
Continuous Power Handling 400 W
Sensitivity 97.0 dB
Frequency Range 65 – 4000 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 15.0 mm (0.59 in)
Magnetic Gap Depth 7.0 mm (0.28 in)
Flux Density 1.3 T
Surround Shape Triple Roll
Cone Shape Curvilinear
Spider Single
Pole Design T-Pole
Woofer Cone Treatment Waterproof Impregnated Cone
Recommended Enclosure 19.0 dm3 (0.67 ft3)
Recommended Tuning 63 Hz
Resonance Frequency 68 Hz
Re 10.2 Ω
Qes 0.43
Qms 3.3
Qts 0.38
Vas 22.0 dm3 (0.78 ft3)
Sd 220.0 cm2 (34.1 in2)
η₀ 1.5 %
Xmax ± 6.0 mm
Xvar ± 5.5 mm
Mms 18.4 g
Bl 13.7 Txm
Le 0.65 mH
EBP 158 Hz
Overall Diameter 225 mm (8.86 in)
Bolt Circle Diameter 210 mm (8.27 in)
Baffle Cutout Diameter 187.0 mm (7.36 in)
Depth 93 mm (3.66 in)
Flange and Gasket Thickness 9 mm (0.35 in)
Air Volume Occupied by Driver 1.1 dm3 (0.04 ft3)
Net Weight 1.8 kg (3.97 lb)
Recone kit RCK008MBX5116
Article B&C 8mbx51-16

B&C SPEAKERS

Additional information

Weight 2.25 kg
Dimensions 150 × 255 × 255 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

200 mm (8.0 in)

Nominal impedance

Minimum Impedance

11.2 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

97.0 dB

Frequency Range

65-4000 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article