B&C 18 DS 115 8 LF Driver B&C 18ds115-8
578,65 Add to cart

B&C 18 DS 115 8 LF Driver B&C 18ds115-8

578,65

Brand: B&C SPEAKERS
Article number: 18ds115-8

  • 3400 W continuous program power capacity
  • 116 mm (4.5 in) four layer aluminum voice coil
  • 30 – 500 Hz response
  • 98 dB sensitivity
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminium demodulating ring for very low distortion

Brand: B&C SPEAKERS
Article number: 18ds115-8

B&C 18 DS 115 8 LF Driver

  • 3400 W Continuous power handling
  • 4.5 in (116 mm) Voice coil diameter
  • Neodymium Inside Slug Magnet material

This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 18DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1700watt AES power rating, 98 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.

Type of speaker 18″
Nominal Diameter mm 460 mm
Impedance Ohm 8 Ω
Power Handling 3400 W
Frequency range 30 – 500 Hz
Sensitivity dB 98.0
Magnet Material Neodymium Inside Slug
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 460 mm (18.0 in)
Nominal Impedance 8 Ω
Minimum Impedance 7.0 Ω
Nominal Power Handling 1700 W
Continuous Power Handling 3400 W
Sensitivity 98.0 dB
Frequency Range 30 – 500 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 40.0 mm (1.57 in)
Magnetic Gap Depth 14.0 mm (0.55 in)
Flux Density 0.8 T
Surround Shape Triple Roll
Cone Shape Radial
Spider Double Silicone
Pole Design T-Pole
Woofer Cone Treatment TWP Waterproof Both Sides
Recommended Enclosure 100.0 dm3 (3.53 ft3)
Recommended Tuning 40 Hz
Resonance Frequency 30 Hz
Re 5.0 Ω
Qes 0.21
Qms 4.3
Qts 0.2
Vas 168.0 dm3 (5.93 ft3)
Sd 1210.0 cm2 (187.55 in2)
η₀ 2.2 %
Xmax ± 16.5 mm
Xvar ± 14.0 mm
Mms 330.0 g
Bl 39.0 Txm
Le 3.85 mH
EBP 142 Hz
Overall Diameter 460 mm (18.11 in)
Bolt Circle Diameter 440 mm (17.32 in)
Baffle Cutout Diameter 422.0 mm (16.61 in)
Depth 248 mm (9.76 in)
Flange and Gasket Thickness 16 mm (0.63 in)
Air Volume Occupied by Driver 10.0 dm3 (0.35 ft3)
Net Weight 12.0 kg (26.46 lb)
Recone kit RCK18DS1158
Article B&C 18ds115-8

B&C SPEAKERS

Additional information

Weight 13.6 kg
Dimensions 275 × 500 × 495 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

460 mm (18.0 in)

Nominal impedance

Minimum Impedance

7.0 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

98.0 dB

Frequency Range

30 – 500 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article