B&C 14 NA 100 8 LF Driver B&C 14na100-8
373,27 Add to cart

B&C 14 NA 100 8 LF Driver B&C 14na100-8

373,27

Brand: B&C SPEAKERS
Article number: 14na100-8

  • 1600 W continuous program power capacity
  • 100 mm (4 in) aluminum voice coil
  • 45 – 2000 Hz response
  • 99 dB sensitivity
  • Aluminium demodulating ring allows a very low distortion figure
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression

Brand: B&C SPEAKERS
Article number: 14na100-8

B&C 14 NA 100 8 LF Driver

  • 1600 W Continuous power handling
  • 4.0 in (100 mm) Voice coil diameter
  • Neodymium Inside Slug Magnet material

A four inch voice coil gives the 14NA100 mid-bass higher power handling and longer excursion capabilities, while an inside slug neodymium magnet provides high motor strength and efficiency. This all around performer is perfect for maximum output two way applications, especially thanks to its aluminum demodulating ring which reduces distortion and flattens impedance into the mid frequencies.

Type of speaker 14″
Nominal Diameter mm 359 mm
Impedance Ohm 8 Ω
Power Handling 1600 W
Frequency range 45 – 2000 Hz
Sensitivity dB 99.0
Magnet Material Neodymium Inside Slug
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 359 mm (14.0 in)
Nominal Impedance 8 Ω
Minimum Impedance 6.2 Ω
Nominal Power Handling 800 W
Continuous Power Handling 1600 W
Sensitivity 99.0 dB
Frequency Range 45 – 2000 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 23.0 mm (0.91 in)
Magnetic Gap Depth 11.0 mm (0.43 in)
Flux Density 1.15 T
Surround Shape Triple Roll
Cone Shape Radial
Spider Double Silicone
Pole Design T-Pole
Woofer Cone Treatment WP Waterproof Front Side
Recommended Enclosure 60.0 dm3 (2.12 ft3)
Recommended Tuning 50 Hz
Resonance Frequency 43 Hz
Re 5.1 Ω
Qes 0.24
Qms 5.6
Qts 0.23
Vas 99.5 dm3 (3.51 ft3)
Sd 707.0 cm2 (109.59 in2)
η₀ 3.1 %
Xmax ± 8.8 mm
Xvar ± 8.5 mm
Mms 96.5 g
Bl 23.5 Txm
Le 0.74 mH
EBP 179 Hz
Overall Diameter 359 mm (14.13 in)
Bolt Circle Diameter 343 mm (13.5 in)
Baffle Cutout Diameter 324.0 mm (12.76 in)
Depth 176 mm (6.93 in)
Flange and Gasket Thickness 12 mm (0.47 in)
Air Volume Occupied by Driver 3.5 dm3 (0.12 ft3)
Net Weight 8.3 kg (18.3 lb)
Recone kit RCK14NA1008
Article B&C 14na100-8

B&C SPEAKERS

Additional information

Weight 9.6 kg
Dimensions 224 × 425 × 425 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

359 mm (14.0 in)

Nominal impedance

Minimum Impedance

6.2 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

99.0 dB

Frequency Range

45-2000 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article