Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
RCF MID – BASS. MB15N351
280,14 Add to cart

RCF MID – BASS. MB15N351

280,14

Brand: RCF
Article number: MB15N351

  • 3.5-inch, inside/outside copper voice coil
  • 1300W continuous program power handling
  • 100 dB Sensitivity
  • 40 Hz – 3 kHz Frequency range
  • 3.5-inch, inside/outside copper voice coil
  • 1300W continuous program power handling
  • 100 dB Sensitivity
  • 40 Hz – 3 kHz Frequency range
  • Dual-forced air ventilation for minimum power compression
  • Dual spider design with silicon based dampening control
This MB15N351 is designed to provide an excellent linearity in the frequency response with low distortion. The transducer is built around a very stronger neodymium magnetic structure and a new 3,5” voice coil, this combination provides to increase the power handling especially in comparison a standard 3″ voice coil. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimize the power compression at the higher power handling.

  • General specifications
    • Nominal Diameter: 15 inch / 381 mm
    • Rated Impedance: 8 ohm
    • Program Power: 1300 W
    • Power handling capacity: 650 W
    • Sensitivity: 100.0 dB
    • Frequency range: 40 – 3000 Hz
    • Effective piston diameter: 330 mm / 12.99 inch
    • Max. Excursion Before Damage: 39 mm / 1.54 inch
    • Minimim Impedance: 6.8 ohm
    • Voice Coil Diameter: 3.5 inch / 89 mm
    • Voice Coil Winding Material: Copper
    • Voice Coil Length: 17 mm / 0.67 inch
    • Number of layers: 2
    • Kind of layers: inside/outside
    • Top Plate Thickness: 11 mm / 0.43 inch
    • Cone Design: Curved
    • Surround Material: Polycotton
    • Surround Design: M-roll
    • Magnets: Neodymium
    • Dual-force air ventilation: Yes
    • Spider: Dual with silicon based damping control

  • Thiele – small parameters
    • Resonance frequency (Fs): 42 Hz
    • DC resistance (Re): 5.60 ohm
    • Mechanical factor: 4.00 Qms
    • Electrical factor (Qes): 0.24 Qes
    • Total factor: 0.22 Qts
    • BL factor (BL): 22.50 T x m
    • Effective moving mass (Mms): 80.0 g
    • Equivalent Cas air loaded (Vas): 191.0 liters
    • Effettive piston area (Sd): 0.090 m2
    • Max. linear excursion (Xmax): 6.0 mm
    • Voice coil inductance @ 1kHz (Le1k): 1.65 mH
    • Half-space efficency (Eff): 5.68%

  • Mounting Information
    • Overall diameter: 393 mm / 15.47 inches
    • Bolt circle diameter: 371-376 mm / 14.61-14.8 inch
    • Bolt hole diameter: 7 mm / 0.28 inch
    • Front mount baffle cut-out: 354 mm / 13.94 inch
    • Rear mount baffle cut-out: 354 mm / 13.94 inch
    • Volume occupied by the driver: 3.8 liters / 0.15 ft3

  • Standard compliance
    • CE marking: Yes

  • Size
    • Weight: 5.16 kg / 11.38 lbs
    • Height: 180 mm / 7.09 inches
    • Diameter: 393 mm / 15.47 inches

  • Shipping informations
    • Package Width: 440 mm / 17.32 inches
    • Package Weight: 6.52 kg / 14.37 lbs
    • Package Height: 230 mm / 9.06 inches
    • Package Depth: 440 mm / 17.32 inches

Additional information

Weight0106,52 kg
Dimensions440 × 440 × 230 cm
Brand

Nominal Diameter

15 inch / 381 mm

Rated Impedance

8 ohm

Program Power

1300 W

Power handling capacity

650 W

Sensitivity

100.0 dB

Frequency Range

40 – 3000 Hz

Effective Piston Diameter

330 mm / 12.99 inch

Max Excursion Before Damage

39 mm / 1.54 inch

Minimim Impedance

Voice coil diameter

Voice Coil Winding Material

Voice Coil Length

Number of layers

Kind of layers

Top Plate Thickness

Cone Design

Surround Material

Surround Design

Magnets

Dual-force air ventilation

Spider

Resonance frequency (Fs)

DC resistance (Re)

Mechanical factor

Electrical factor (Qes)

Total factor

BL factor (BL)

Effective moving mass (Mms)

Equivalent Cas air loaded (Vas)

Effettive piston area (Sd)

Max. linear excursion (Xmax)

Half-space efficency (Eff)

Overall diameter

Bolt circle diameter

Bolt hole diameter

Front mount baffle cut-out

Rear mount baffle cut-out

Volume occupied by the driver

CE marking

Weight

Height

Diameter

Package Width

Package Weight

Package Height

Package Depth