Shop will be unavailable for next few days. Thank you for your patience and apologize for any inconvenience.
RCF WOOFER. LF18X401
320,74 Add to cart

RCF WOOFER. LF18X401

320,74

Brand: RCF
Article number: LF18X401

  • 4-inch, fiberglass inside/outside copper voice coil
  • 3000W continuous program power handling
  • 97.5 dB Sensitivity
  • 25 Hz – 1 kHz Frequency range
  • 4-inch, fiberglass inside/outside copper voice coil
  • 3000W continuous program power handling
  • 97.5 dB Sensitivity
  • 25 Hz – 1 kHz Frequency range
  • Dual Forced Hyperventing System
  • Dual spider design with silicon based dampening control
  • Triple-roll surround and corrugated straight cone geometry
Very linear frequency response characteristics, extreme high power handling while generating the lowest harmonic distortion of any comparable 18-inch transducer within its application range. The LF18X401 uses a fibre loaded cone assembly along with a high excursion triple roll surround. This combination provides remarkable strength and a peak to peak maximum excursion of 50 mm. The new dual forced hyper-venting system guarantee a very efficient voice coil ventilation for minimum power compression and incredible power handling.

  • General specifications
    • Nominal Diameter: 18 inch / 457 mm
    • Rated Impedance: 8 ohm
    • Program Power: 3000 W
    • Power handling capacity: 1500 W
    • Sensitivity: 97.5 dB
    • Frequency range: 25 – 1000 Hz
    • Effective piston diameter: 395 mm / 15.55 inch
    • Max. Excursion Before Damage: 50 mm / 1.97 inch
    • Minimim Impedance: 6.5 ohm
    • Voice Coil Diameter: 4.0 inch / 102 mm
    • Voice Coil Winding Material: Copper
    • Voice Coil Length: 30 mm / 1.18 inch
    • Number of layers: 2
    • Kind of layers: inside/outside
    • Top Plate Thickness: 15 mm / 0.59 inch
    • Cone Design: Straight
    • Surround Material: Polycotton
    • Surround Design: Triple roll
    • Magnets: Ceramic
    • Dual-force air ventilation: Yes
    • Spider: Dual with silicon based damping control

  • Thiele – small parameters
    • Resonance frequency (Fs): 30 Hz
    • DC resistance (Re): 5.40 ohm
    • Mechanical factor: 7.40 Qms
    • Electrical factor (Qes): 0.31 Qes
    • Total factor: 0.30 Qts
    • BL factor (BL): 26.50 T x m
    • Effective moving mass (Mms): 215.0 g
    • Equivalent Cas air loaded (Vas): 274.0 liters
    • Effettive piston area (Sd): 0.120 m2
    • Max. linear excursion (Xmax): 12.0 mm
    • Voice coil inductance @ 1kHz (Le1k): 0.83 mH
    • Half-space efficency (Eff): 2.30%

  • Mounting Information
    • Overall diameter: 465 mm / 18.31 inches
    • Bolt circle diameter: 442-447 mm / 17.4-17.6 inch
    • Bolt hole diameter: 7 mm / 0.28 inch
    • Front mount baffle cut-out: 424 mm / 16.69 inch
    • Rear mount baffle cut-out: 425 mm / 16.73 inch
    • Volume occupied by the driver: 6.5 liters / 0.26 ft3

  • Standard compliance
    • CE marking: Yes

  • Size
    • Weight: 12.5 kg / 27.56 lbs
    • Height: 196 mm / 7.72 inches
    • Diameter: 465 mm / 18.31 inches

  • Shipping informations
    • Package Width: 524 mm / 20.63 inches
    • Package Weight: 15 kg / 33.07 lbs
    • Package Height: 254 mm / 10 inches
    • Package Depth: 494 mm / 19.45 inches

Additional information

Weight15 kg
Dimensions494 × 524 × 254 cm
Brand

Nominal Diameter

18 inch / 457 mm

Rated Impedance

8 ohm

Program Power

3000 W

Power handling capacity

1500 W

Sensitivity

97.5 dB

Frequency Range

25 – 1000 Hz

Effective Piston Diameter

395 mm / 15.55 inch

Max Excursion Before Damage

50 mm / 1.97 inch

Minimim Impedance

Voice coil diameter

Voice Coil Winding Material

Voice Coil Length

Number of layers

Kind of layers

Top Plate Thickness

Cone Design

Surround Material

Surround Design

Magnets

Dual-force air ventilation

Spider

Resonance frequency (Fs)

DC resistance (Re)

Mechanical factor

Electrical factor (Qes)

Total factor

BL factor (BL)

Effective moving mass (Mms)

Equivalent Cas air loaded (Vas)

Effettive piston area (Sd)

Max. linear excursion (Xmax)

Half-space efficency (Eff)

Overall diameter

Bolt circle diameter

Bolt hole diameter

Front mount baffle cut-out

Rear mount baffle cut-out

Volume occupied by the driver

CE marking

Weight

Height

Diameter

Package Width

Package Weight

Package Height

Package Depth