B&C 15 DS 115 4 LF Driver B&C 15ds115-4
547,68 Add to cart

B&C 15 DS 115 4 LF Driver B&C 15ds115-4

547,68

Brand: B&C SPEAKERS
Article number: 15ds115-4

  • 3200 W continuous program power capacity
  • 116 mm (4.5 in) four layer aluminum voice coil
  • 35 – 1000 Hz response
  • 96 dB sensitivity
  • 60 mm peak-to-peak excursion before damage
  • Neodymium magnet allows a very high force factor and linear excursion
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminium demodulating ring for very low distortion

Brand: B&C SPEAKERS
Article number: 15ds115-4

B&C 15 DS 115 4 LF Driver

  • 3200 W Continuous power handling
  • 4.5 in (116 mm) Voice coil diameter
  • Neodymium Inside Slug Magnet material

This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, higher sensitivity, lower distortion and better overall performance. The 15DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1600watt AES power rating, 96 dB sensitivity, and over 14 mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.

Type of speaker 15″
Nominal Diameter mm 380 mm
Impedance Ohm 4 Ω
Power Handling 3200 W
Frequency range 35 – 1000 Hz
Sensitivity dB 96.0
Magnet Material Neodymium Inside Slug
Brand B&C SPEAKERS
Type speaker
Nominal Diameter 380 mm (15.0 in)
Nominal Impedance 4 Ω
Minimum Impedance 4.8 Ω
Nominal Power Handling 1600 W
Continuous Power Handling 3200 W
Sensitivity 96.0 dB
Frequency Range 35 – 1000 Hz
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 40.0 mm (1.57 in)
Magnetic Gap Depth 14.0 mm (0.55 in)
Flux Density 0.8 T
Surround Shape Triple Roll
Cone Shape Radial
Spider Double Silicone
Pole Design T-Pole
Woofer Cone Treatment TWP Waterproof Both Sides
Recommended Enclosure 80.0 dm3 (2.83 ft3)
Recommended Tuning 40 Hz
Resonance Frequency 34 Hz
Re 3.2 Ω
Qes 0.17
Qms 4.7
Qts 0.16
Vas 83.0 dm3 (2.93 ft3)
Sd 855.0 cm2 (132.53 in2)
η₀ 1.9 %
Xmax ± 16.5 mm
Xvar ± 14.0 mm
Mms 273.0 g
Bl 33.6 Txm
Le 3.2 mH
EBP 200 Hz
Overall Diameter 393 mm (15.47 in)
Bolt Circle Diameter 375 mm (14.76 in)
Baffle Cutout Diameter 354.0 mm (13.94 in)
Depth 199 mm (7.83 in)
Flange and Gasket Thickness 15 mm (0.59 in)
Air Volume Occupied by Driver 7.0 dm3 (0.25 ft3)
Net Weight 11.6 kg (25.57 lb)
Recone kit RCK15DS1154
Article B&C 15ds115-4

B&C SPEAKERS

Additional information

Weight 12.9 kg
Dimensions 224 × 425 × 425 cm
Type of speaker

Nominal Diameter mm

Impedance Ohm

Power Handling

Sensitivity (dB)

Magnet Material

Brand

Type

Nominal Diameter

380 mm (15.0 in)

Nominal impedance

Minimum Impedance

4.8 Ω

Nominal Power Handling

Continuous Power Handling

Sensitivity

96.0 dB

Frequency Range

35 – 1000 Hz

Winding Material

Former Material

Winding Depth

Magnetic Gap Depth

Flux Density

Surround Shape

Cone Shape

Spider

Pole Design

Woofer Cone Treatment

Resonance Frequency

Re

Qes

Qms

Qts

Vas

Sd

η₀

Xmax

Xvar

Mms

BL

Le

EBP

Overall diameter

Bolt circle diameter

Baffle cutout diameter

Depth

Flange and Gasket Thickness

Air Volume Occupied by Driver

Net weight

Recone kit

Article